Untitled Document

  AA88347LP
»çÁøÀ» µî·ÏÇÏ¿© ÁÖ¼¼¿ä.
(»çÀÌÁî 200 * 200)
  ±âº»Á¤º¸
    Parts No : AA88347LP
    Description : 8-bit 8-channel D/A converter
    Supply : 2.7-3.6V
    Package : TSSOP16
    Size : - X - X -
  Data Sheet
     AA88347LP_20050602.pdf (101.0K) [11]
  General Description
¡á General Description
   
    The AA88347LP is a CMOS processed digital to analog converter (DAC) with 8-bit
    redo- lotion, low leakage current and low operating current. The AA88347LP has 8 channels
    with build in operational amplifier output buffers which could operate in the full-swing
    voltage range from VCC to GND and enhance the Drive/Sink ability up to max. 1mA.

    Digital data(DI) input serially in a max. 2.5 MHz clock(CLK) rate. The latched 12-bit digital
    data are converted into an analog DC voltage in the range from VSS to VDD with 8-bit
    resolution in one of the eight channels by the D/A converter in a max. 200¥ìs settling time.

    AA88347LP is a single 3V power DAC. Analog DC output could be full voltage swing
    as the analog power is equal to the system power In addition to normal D/A converter
    applications, AA88347LP is also available for electronic volumes and instead of potentio -
    meters for adjustment due to its high stability on the capacitive load. 16 pins TSSOP   
    package type are available for AA88347LP. Its operational temper- nature range is specified
    over –20¡É to 85¡É.


¡á Features

    - 12 bits serial data input(3 wire serial data transfer method, DI, CLK, LD)
    - R-2R resistor ladder used for D/A conversion
    - 8 channels with 8-bit resolution monotonic D/A converter
    - 8 channel buffer operational amplifiers operating in the full voltage range
      from VCC to GND only if VDD=VCC and VSS=GND
    - Max. 2.5 MHz serial digital data input
    - Serial I/O for cascade application
    - Max. 1.0 mA output drive/sink current
    - Two separate power supply/ground lines for system and analog power supply
    - Single +3 V system power supply